Indoor Air Quality

Mold & indoor air quality testing

Air and surface sampling through an accredited lab — with a straight explanation of what the results can and cannot tell you.

Start here

There is no federal standard for mold.

This is the single most important thing to understand before paying anyone for a mold test. The EPA has not set standards or threshold limit values for airborne mold or mold spores, and neither has any other federal agency. No sample result can show that a house complies with a federal mold standard, because no such standard exists.

That does not make sampling useless. It makes the claims some companies build around it useless. EPA describes sampling as helpful for locating a source, identifying some of the species present, and verifying that an area has been adequately cleaned after remediation. Those are real uses. "Your house failed the mold test" is not one of them.

When it is worth doing

Good reasons to sample

Something smells wrong

A persistent musty odour with no visible growth. Sampling alongside moisture readings can help narrow down where it is coming from before anyone opens up a wall.

Symptoms indoors

Occupants feel worse in the building than out of it, and you want documentation of conditions rather than a guess. Useful as a baseline, not as a diagnosis.

After remediation

Verifying that cleanup actually worked. Post-remediation samples should resemble local outdoor air. This is one of the clearest uses EPA identifies.

When it is not

When I will tell you to save your money

  • You can already see it. EPA's position is that when visible mold growth is present, sampling is generally unnecessary. The growth is the finding. Spend the money on finding the water instead.
  • You want a clean bill of health. A single air sample captures one moment in one location. It cannot certify a house as mold-free, and no honest report will say it does.
  • Nobody has looked for moisture yet. Mold is a symptom. The key to mold control is moisture control, and a lab result that arrives without a moisture source identified has not solved anything.

What I do

Moisture first, samples second.

Before any sample is taken I walk the building with a moisture meter and thermal camera, looking at the places water actually gets in — roof and flashing, grading and drainage, plumbing penetrations, crawlspace ground cover and ventilation, window and door sills, and the areas around tubs and showers. Finding a wet wall cavity is worth more than a spore count.

Where sampling is warranted, an indoor air sample is paired with a matched outdoor control, because indoor numbers are only interpretable against the air outside that day. Surface swabs or tape lifts can be added where there is visible growth to identify. Everything ships overnight to an accredited laboratory, and you get the lab's written report along with my explanation of what it does and does not establish.

EPA guidance is clear that mold sampling should be done by people with specific experience in sampling protocols and interpreting results, with analysis following methods recommended by AIHA, ACGIH, or comparable professional bodies. That is the standard I work to.

When a single swab is the right call

Sometimes somebody else needs it in writing.

A surface swab identifies what is growing on one spot. On its own it says nothing about the air in the rest of the house — but there are situations where identifying that one spot, on paper, from a certified inspector, is exactly what is needed.

A lender or underwriter is holding the file

A loan condition naming visible growth is the most common reason I get called for a single swab. Send me the lender’s written condition before I quote. “They want a mold test” can mean identify this spot, or verify an area was cleaned after remediation, or simply a letter saying a professional evaluated it — and those are three different jobs. Quoting the wrong one costs you days you do not have on a closing.

You are not certain it is mold

Soot, efflorescence, overspray and plain staining all get called mold. If the question is genuinely what it is, a swab answers it.

Verifying a cleanup actually worked

Post-remediation verification is one of the clearest uses EPA names. Depending on what is being verified this may call for air samples with a matched outdoor control rather than a swab — I will tell you which before you book.

An insurer, landlord or tenant wants documentation

When the result has to stand up to somebody else, you want it taken under protocol by a certified inspector with no stake in the remediation.

And when it is not

If you can see it, you already know it is mold, and nobody is asking you to prove it — you probably do not need a swab. Remediation is the same regardless of the species, so the money is better spent finding the water that is feeding it. I would rather tell you that than take $175 to confirm what you can see with your own eyes.

$175 for a standalone single-swab visit, lab analysis and written result included, or $65 if it is added to an inspection or an air quality visit I am already making. Lab turnaround is generally a few business days — if you are working to a closing date, order it early.

Pricing

Straightforward, with the shipping included

$250 — add-on

Added to a home inspection on the same visit. Includes the indoor sample, matched outdoor control, and overnight lab shipping.

$350 — standalone

A separate visit, for homeowners not buying or selling. Same sampling and lab work, priced to cover the trip.

Moisture assessment

Included in every home inspection at no extra cost. Thermal imaging and moisture readings across the areas where water usually gets in.

Additional sample locations

$85 per additional air sample location, $65 for a surface swab or tape lift where there is visible growth to identify, or $175 for a standalone visit to take a single swab. One outdoor control covers every indoor sample taken the same day — you are never charged for a second one. I will tell you the price before any extra sample is taken, never after.

Discounts apply to the base inspection fee only, never to add-on services.

Questions

Common questions

Is there a legal limit for mold in a house?
No. Neither EPA nor any other federal agency has set standards or threshold limit values for airborne mold or mold spores. That means no sample can tell you a house passes or fails, because there is nothing to pass or fail against. Anyone who tells you a house is over the legal limit is selling something.
Then what is sampling actually good for?
Three things, per EPA guidance: helping locate a source when growth is suspected but not visible, identifying some of the species present, and confirming whether an area has been properly cleaned after remediation. After remediation, indoor samples should look broadly similar to outdoor air.
If I can already see mold, should I test?
Usually not. EPA is direct about this: in most cases, if visible mold growth is present, sampling is unnecessary. Visible growth is the finding. The money is better spent identifying the moisture source and correcting it, because mold that is cleaned without fixing the water comes back.
What does the test involve?
An indoor air sample plus a matched outdoor control sample, since indoor results only mean something compared against the air outside that day. Where there is visible growth, a surface swab or tape lift can be taken as well. Samples ship overnight to an accredited laboratory and results come back as a written report.
How fast do I get results?
Samples ship overnight and lab turnaround is generally a few business days. Overnight shipping is included in the price.
What does it cost?
$250 as an add-on to a home inspection, or $350 as a standalone visit. That covers the indoor air sample, the matched outdoor control, and overnight lab shipping. Additional air sample locations are $85 each, and a surface swab or tape lift is $65. A standalone single-swab visit, lab analysis included, is $175. One outdoor control covers every indoor sample taken the same day, so you are never charged for a second control. You will hear the price before an extra sample is taken.
Can you remediate what you find?
No, and that is intentional. I test and report; I do not sell remediation. An inspector who profits from the cleanup has an obvious reason to find a problem. If a sample warrants remediation I will tell you what the lab found and you can hire independently.

Not sure whether you need it?

Call and describe what you are seeing. If sampling will not help, I will say so.

Call/Text 270-681-0756

Sources. U.S. EPA, Mold Testing or Sampling and Mold Course Chapter 3; EPA, A Brief Guide to Mold, Moisture and Your Home (402-K-02-003); analytical methods per the American Industrial Hygiene Association and the American Conference of Governmental Industrial Hygienists.

“For nothing is secret, that shall not be made manifest.”

Luke 8:17

Call Kyle Text a Question